Incremental Encoder Shaft E6c2-Cwz6c 500pr
Min.Order : 1 Pieces Quick Quotation >
Item Details
Product Description
Model NO.: ID02-38L6-I1000C3P | Type:Rotary Encoder |
Working Principle:Incremental | Readout Mode:Contact |
Operating System:Magnetoelectric Type | Signal Output:Complementary Push-pull Output |
Axle Sleeve Type:Empty Type | Installation Form:Axonia |
Brand:IDENCODER | Axonia:Clamping Flange Type |
Outer Diameter:38mm | Trademark:IDENCODER |
Specification:CE | Origin:SHANDONG |
HS Code:8543709990 |
ID02-38L6-I1000C3P
ID02-38L6-I1000C3P Incremental Rotary Encoder 38mm Dia Shaft 8E6C2-CWZ6C 1000P Incremental Rotary Encoder 38mm Dia Shaft 6 Product Name: E6C2-C
Product introduction:
Firm& simple
Seal bearing, realize drip-proof and oil-proof performance of IP6f4
Enhance the performance of shaft load resistant, realize radial load of 50N and axial load of 30N.
The cable leading method is slanting, including transverse and back direction.
With protection circuit against reversing connection and load short circuit, improve reliability.
(also has linear driver output) Product Category: Outside diameter 50(slim type) PCB Sensors
1.Encoding method Incremental
2.Power supply voltage 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)E6C2-CWZ1X 500P/R 2M PCB Sensorsdata sheet
Encoding method | Incremental |
---|---|
Power supply voltage | 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.) |
Current consumption | 160mA DC Max. |
Inrush current | Current: approx. 9 A (Time: approx. 0.3 ms) |
Resolution (Single turn type) | 500 P/R |
Output phases | A, -A, B, -B, Z and -Z |
Control output (Output type) | Line driver output |
Control output (Load current) | High level(Io): -20 mA Low level(Is): 20 mA |
Control output (Output voltage) | Vo: 2.5 V Min. Vs: 0.5 V Max. |
Starting positional point | Equipped |
Max. response frequency | 100 kHz |
Phase difference on output | 90 DEG -45 to +45 DEG |
Rise and fall times of output | Rise time of output: 0.1 us Max. Fall time of output: 0.1 us Max. (Cable length: 2m, Io: -20mA Is: 20mA) |
Starting torque | Room temperature: 10 mN.m Max. |
Moment of inertia | 3*10-7kg.m2 Max. |
Shaft loading | Radial: 50 N Thrust: 30 N |
Max. permissible rotation | 6000 r/min |
Mechanical life expectancy | 100 million rotations Min. |
Ambient temperature | Operating: -10 to 70 CEL Storage: -25 to 85 CEL (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no condensation) |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 500 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 500 Hz, 2-mm or 150m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
Shock resistance | 1000m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP64 Company standard: Oil resistance |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN50081-2 Emission Enclosure: EN55011 Group 1 classA Emission AC mains: EN55011 Group 1 classA Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Material (case) | Zinc alloy |
Material (body) | Aluminum |
Material (shaft) | SUS420J2 |
Tightening torque | 0.5 N.m Max. (with M4 screw) |
Weight (packed state) | approx. 400 g |
Accessories | Instruction manual |
Payment & Shipping
More Product
Recommend Product